chinese www.toplabel.cn

TLB 4001A

Description:
  TLB4001A is a soft PVC film with strong adhesive. It meets the flame retardant standards of UL94-VTM-0 and is applicable to various diameter of cable enveloping labels. The surface of the label is suitable for printing .After labeling ,the label will not curve upwards .The label provides good oil resistant and waterproof properties, is applicable for electronic、 telecommunication、electrical power system and cable processing industries.
-----------------------------------------------------------------------------------------------------------------------------------------------------
Features:
● Excellent flame retardant property                  ● Strong mucosity , not curve upwards
● Good printing applicability                                ● Conform to ROHS Directive
● Soft surface material, suitable for labeling of cambered surface
-----------------------------------------------------------------------------------------------------------------------------------------------------
Construction:
  ----------White PVC Film
  ----------Adhesive
  ----------Release Film
-----------------------------------------------------------------------------------------------------------------------------------------------------
Application:
● Electronic and electrical system                        ● Cable and battery industries
-----------------------------------------------------------------------------------------------------------------------------------------------------
Property:
-----------------------------------------------------------------------------------------------------------------------------------------------------
Properties Test Method Typical Results
  ASTM D1000  
Thickness Face sheet 0.080mm
Adhesive 0.025mm
- Total 0.105mm
Adhesive
-Stainless Steel
ASTM D1000
Test speed 50mm/min,20min dwell
6.00N/in
Initial adhesion GB-4852 J. Dow >3#
Permanent adhesion GB-4851 J. Dow >24H
Insulation ASTM D1000 6000 V
Inflammability ASTM D1000
Average burning time
<10 seconds
-----------------------------------------------------------------------------------------------------------------------------------------------------
Durability Testing :
-----------------------------------------------------------------------------------------------------------------------------------------------------
Test Method:Use Zebra printer and TLB121 ribbon or TLB22 ribbon for sample printing. Before testing,put the sample on the aluminum plate for 24 hours. If no specific instructions, the following test result are applied for the two kinds of ribbon.
Properties Test Method Typical Results
Max. temperature 3 days at 120℃ No visible effect
Min. temperature 3 days at -40℃ No visible effect
Humidity resistance 3 days at 37℃,95% RH No visible effect
UV Light resistance 3 days in UV Sunlight™-100 No visible effect
Weatherability 3 days in Xenon Arc Weatherometer
(ASTM G 26)
No visible effect
Salt Fog Resistance 3 days in 5% salt fog solution
chamber (ASTM B 117)
No visible effect
-----------------------------------------------------------------------------------------------------------------------------------------------------
Chemical Testing:
-----------------------------------------------------------------------------------------------------------------------------------------------------
Test Method:Use Zebra printer and TLB121 ribbon or TLB22 ribbon for sample printing. Before testing,put the sample on the aluminum plate for 24 hours .The test goes ahead at room temperature. Every 30 minutes put the sample into designated Chemical Solution for 10 minutes. Repeat 5 times. The last time, after soaking,use cotton ball with test solution to clean the surface of the sample for 10 times.
Chemical Solution Visual Changes
Label TLB121 TLB22
Freon-® TMS No visible effect No visible effect No visible effect
Isopropyl Alcohol No visible effect No visible effect No visible effect
Inorganic Alcohol No visible effect No visible effect No visible effect
JP-8 Jet Fuel No visible effect No visible effect No visible effect
ASTM 3 oil No visible effect No visible effect No visible effect
Mil 5606 oil No visible effect No visible effect No visible effect
Skydrol®-500B-4 No visible effect No visible effect No visible effect
Super Agitene-® No visible effect No visible effect No visible effect
BIOACT-EC-7-™ metallics No visible effect No visible effect No visible effect
Deionized water No visible effect No visible effect No visible effect
3% Alconox-® Detergent No visible effect No visible effect No visible effect
10% Sodium Hydroxide solution No visible effect No visible effect No visible effect
10% Sulfuric Acid solution No visible effect No visible effect No visible effect
※The above data sheet and test results are only for reference. Before using, please test them in actual use. Toplabel will not responsible for any loss caused by operating error and improper use. If you need more information,please phone our technique department. The company will regularly update the above technical information.
-----------------------------------------------------------------------------------------------------------------------------------------------------
Storage Stability:
-----------------------------------------------------------------------------------------------------------------------------------------------------
Sealed in original packing ,the product can be stored at 23℃ and 65% RH for at least one year.
 

-----------------------------------------------------------------------------------------------------------------------------------------------------      
    通用标签系列TLB 4001A(MSDS)

 
 
<< 返回
 
Contact | Sitemap Toplabel Material Tech Copyright